Struct XMac

pub struct XMac<'a, R: Radio<'a>, A: Alarm<'a>> { /* private fields */ }

Implementations

impl<'a, R: Radio<'a>, A: Alarm<'a>> XMac<'a, R, A>

pub fn new( radio: &'a R, alarm: &'a A, rng: &'a dyn Rng<'a>, mac_buf: &'static mut [u8], ) -> XMac<'a, R, A>

Trait Implementations

impl<'a, R: Radio<'a>, A: Alarm<'a>> AlarmClient for XMac<'a, R, A>

fn alarm(&self)

Callback indicating the alarm time has been reached. The alarm MUST be disabled when this is called. If a new alarm is needed, the client can call Alarm::set_alarm.

impl<'a, R: Radio<'a>, A: Alarm<'a>> Client for XMac<'a, R, A>

fn randomness_available( &self, randomness: &mut dyn Iterator<Item = u32>, _error: Result<(), ErrorCode>, ) -> Continue

Called by the (RNG)[trait.RNG.html] when there are one or more random numbers available

impl<'a, R: Radio<'a>, A: Alarm<'a>> Mac<'a> for XMac<'a, R, A>

fn initialize(&self) -> Result<(), ErrorCode>

Initializes the layer.

fn is_on(&self) -> bool

Indicates whether or not the MAC protocol is active and can send frames

fn start(&self) -> Result<(), ErrorCode>

Start the radio.

fn set_config_client(&self, client: &'a dyn ConfigClient)

Sets the notified client for configuration changes

fn set_address(&self, addr: u16)

Sets the short 16-bit address of the radio

fn set_address_long(&self, addr: [u8; 8])

Sets the long 64-bit address of the radio

fn set_pan(&self, id: u16)

Sets the 16-bit PAN id of the radio

fn get_address(&self) -> u16

The short 16-bit address of the radio

fn get_address_long(&self) -> [u8; 8]

The long 64-bit address of the radio

fn get_pan(&self) -> u16

The 16-bit PAN id of the radio

fn config_commit(&self)

Must be called after one or more calls to set_*. If set_* is called without calling config_commit, there is no guarantee that the underlying hardware configuration (addresses, pan ID) is in line with this MAC protocol implementation. The specified config_client is notified on completed reconfiguration.

fn set_transmit_client(&self, client: &'a dyn TxClient)

Sets the notified client for transmission completions

fn set_receive_client(&self, client: &'a dyn RxClient)

Sets the notified client for frame receptions

fn set_receive_buffer(&self, buffer: &'static mut [u8])

Sets the buffer for packet reception

fn transmit( &self, full_mac_frame: &'static mut [u8], frame_len: usize, ) -> Result<(), (ErrorCode, &'static mut [u8])>

Transmits complete MAC frames, which must be prepared by an ieee802154::device::MacDevice before being passed to the Mac layer. Returns the frame buffer in case of an error.

impl<'a, R: Radio<'a>, A: Alarm<'a>> PowerClient for XMac<'a, R, A>

fn changed(&self, on: bool)

The power state of the radio changed. This is called when the radio has turned on or off.

impl<'a, R: Radio<'a>, A: Alarm<'a>> RxClient for XMac<'a, R, A>

fn receive( &self, buf: &'static mut [u8], frame_len: usize, lqi: u8, crc_valid: bool, result: Result<(), ErrorCode>, )

Packet was received.

impl<'a, R: Radio<'a>, A: Alarm<'a>> TxClient for XMac<'a, R, A>

fn send_done( &self, buf: &'static mut [u8], acked: bool, result: Result<(), ErrorCode>, )

Send is complete or an error occurred during transmission.